hack your Own WPA Network

How To Hack And Protect

 Your Own WPA Network

Get paid to 
share your links!

If You probably own a personal wireless  hot spot at home. Having several devices under one roof seems like a good reason to convert your broadband internet into a wireless connection. Some internet providers in your area might even have paid Wi-Fi hotspots for homes and establishments.

Since anyone can connect to your Wi-Fi network, the next best idea is to protect it with a WPA password. A WPA password prevents freeloaders from using your internet and deal with more pressing issues such as privacy and hacking. However, this is not a full-proof method. Securing your Wi-Fi network no longer guarantees safety from prying eyes; let alone people who want to get free internet. People can easily crack your network’s password with the aid of certain tools.

In the early part of this article, we will teach you how to hack your own WPA-secured network with a tool called Reaver. Later on, we will explain how to protect your home network from Reaver attacks.

Note: Hacking of other WPA networks is ilegal-advised and illegal in many countries so we don’t recommend it. We also discourage using Reaver for any malicious intent. Consider this article as an educational tool that will better inform you of how people hack into WPA networks so you can better protect yourself, your family, and friends from hackers.

component needed:

Requirements:

• Wi-Fi ready computer. BackTrack works with the wireless cards found in most laptops and computers. It is a bootable Linux environment which makes using Reaver less strenuous. BackTrack doesn’t work on all computers with wireless internet connectivity so there are no guarantees.
• DVD drive. You need it to boot into BackTrack mode. A built-in DVD drive will come in handy but if your computer doesn’t have one, you can attach a portable DVD drive via USB.
• BackTrack 5 Live DVD. Reaver can be downloaded from the live program. You can get BackTrack 5 here for free and burn it into a DVD. The latest available version as of this writing is BackTrack 5 R3. To download BackTrack, CLICK HERE. Choose the latest version from the BackTrack Release drop-down menu. Under Windows Manager, select “GNOME”.Then, choose from 32- and 64-bit architecture depending on your computer. Finally, select “ISO” under Image Type and choose your download method.
• An active WPA network with WPS enabled. For Reaver to work, you need a WPA-secured Wi-Fi network which has WPS enabled. Reaver exploits a WPS security hole which makes hacking WPA networks possible

Note: If you know how VMWare works, you can choose it instead of ISO under Image Type when downloading BackTrack. Otherwise, stick with ISO image.

You should know…

Reaver takes plenty of time to hack WPA networks. It tests different crack combinations on your router until it identifies the right password. According to its developers, the program could take 4 to 10 hours before Reaver successfully cracks a WPA network. The performance of your computer could determine the speed at which it works. Fortunately, you can pause Reaver without losing progress. To pause the program simply press Ctrl+C while it is running. please don’t shut down your computer because that will cause Reaver to lose its progress when attempting to crack a WPA network.

Reaver doesn’t work on all routers so there’s no guarantee that it will crack your wireless home network. Furthermore, the wireless network you are trying to hack should have a strong signal.

How to crack WPA networks with Reaver

1. Boot into BackTrack mode. Place your pre-made BackTrack Live DVD into your DVD drive. When BackTrack prompts you to choose from a selection of boot modes, choose “BackTrack Text – Default Boot Text Mode” and hit Enter. After a while, BackTrack will take you to the command line prompt. At the command line prompt, type startx and hit Enter. You will then be taken into a graphical UI of BackTrack.

2. Install Reaver. Reaver is not part of the live DVD so you have to download and install it. You begin by connecting to your home Wi-Fi network. Don’t forget to input your WPA password! Once you’re online, go back to the command prompt and type the following command:

apt-get update

This will download Reaver. When the update is finished, type:

apt- get install reaver

3. Disconnect from your home network. This step is optional but if you want to make sure that Reaver works, you can do it as a precaution. In addition, you can choose to forget your network or even change your WPA password.

4. Find out your wireless card’s interface name. This information is needed for hacking WPA networks. On the Terminal, type the following command and hit Enter

iwconfig

The name identified beside your wireless card information such as IEEE and ESSID is your wireless card’s interface name. It is likely wlan0 but it could be different.

5.  Place your wireless card into “monitor mode”. Using the interface name you acquired from step 4, type the following command and press Enter. For the sake of illustration, we are assuming thatwlan0 is your wireless card’s interface name.

airmon-ng start wlan0

This command will display the name of your monitor mode interface. It will show something like:

(monitor mode enabled on mon0)

Here, mon0 is the name of the monitor mode interface but it varies across devices.

6.  Discover the BSSID of the wireless router you want to crack. You can do this by typing the following command at the Terminal.

airodump-ng wlan0

Again, use the wireless card interface name you acquired from Step 4 in replacement of wlan0.If the above command doesn’t work on you, try the following command:

airodump-ng mon0

Don’t forget to replace mon0 with the information you got from Step 5.

After placing the right command, you will see an assortment of wireless networks within your computer’s range. Select the WPA network you want to crack (preferably your home network) and copy its BSSID. You can find it on the far left and consists of a series of letters, numbers, and colons. An example of BSSID is 96:84:0D:DA:56:FD.

Remember: When choosing a network from the list, it should be either WPA or WPA2 as listed under the ENC column.

7.  Use Reaver to crack a network’s WPA password. On the Terminal, use the command below. Use the information you acquired from Steps 5 (monitor mode interface name) and 6 (BSSID) to replace the moninterface and bssid of the following command.

reaver -i moninterface -b bssid -vv

With the right information in place, it should look something like this:

reaver –i mon0 -b 96:84:0D:DA:56:FD –vv

Hit Enter and wait for the process to finish.

8.  Retrieve the WPA password. When Step 7 is done, look for the information listed beside WPA PSK. This is the WPA password. Here you can confirm if Reaver successfully cracked your home network.

hacking terri